Quickly understand the operation process of the needle-free dosing mold

 Needle-free dosing mold is a kind of production equipment commonly used in medical, beauty, home and other industries. It can quickly and accurately inject liquid medicine into the syringe, and it is convenient, safe and efficient to use. Next, let us quickly understand the operation process of the needle-free dosing mold.

1. Installation preparation

 First of all, it is necessary to check whether the packaging of the needle-free dosing mold is intact, and confirm whether the various accessories in the packaging are complete. It is then cleaned and disinfected to ensure the sterility of the mold. Next, connect the dispensing tubing to the syringe, checking the connection for tightness once connected to prevent spillage. Finally, the entire mold is installed, and the position of the syringe is properly adjusted to ensure that the syringe and the mold can be connected through the microporous tube in the mold after they are staggeredly engaged.

2. Operation process

 Open the inlet of the mold: first wipe the injection plug on the surface of the needle-free dosing mold with medical cotton balls or gauze to prevent contamination and cross-infection. Then, hold the syringe with your hand and gently pull it out of the mold to open the inlet of the mold.

 Dosing: Pour the prepared liquid into the liquid chamber in the mold. Tilt slightly so that the liquid medicine flows to the micro-orifice along the mold wall until the liquid medicine reaches the micro-orifice. At the same time, the angle of the mold can also be properly adjusted to make the liquid medicine enter the syringe more smoothly and avoid foaming.

 Close the inlet: After the liquid medicine is injected, insert the syringe back into the mold, press the syringe lightly by hand, and then squeeze out the air in the syringe. Finally, pull out the syringe, wipe the inlet on the surface of the mold with a medical cotton ball or gauze, and then close it.

3. Finishing work

 Clean the liquid medicine tank and liquid medicine pipeline in the needle-free dosing mold, and store it in a dry and ventilated place lightly; at the same time, clean and disinfect the syringe for the next use.

 In short, the operation process of the needle-free dosing mold is simple, convenient and safe. As long as the correct steps are followed, the accuracy and efficiency of drug injection can be effectively improved, the occurrence of pollution and cross-infection can be reduced, and the quality and use effect of products in various industries such as medical treatment, beauty treatment and home furnishing can be guaranteed.